Preparando el desague del techo, para colocar la canaletaºººººPreparing the roof drainage, to place the gutter.

Hola a todos, para los amigos que me siguen, a los cuales les dedico mis trabajos, que les puede ser de mucha ayuda, para aquellos que lo tienen que hacer a dicho trabajo y no saben como comenzarlo, en esta ocacion como bien saben esto construyendo mi garage, ahora esto preparando lo que seria el desague, cuando coloque la canaleta, de esa manera cuando llueva el agua que cae del techo, ya no perjudicara una parte del jardin y la misma correra por las cañerias que estoy armando, comenzando por cortar el caño de 100, para tener en cuenta bien la medida que utilizare para dicho desague.

image.png

Como les comente amigos, dicho desague de la canaleta, la hago coincidir por el desague flubial que viene de la casa, la misma se encuentra en la parte del fomdo del terreno, entonces dicho desague coincide justo cona de la rejillas.

image.png

Asi que para conectar dicho caño, lo primero es preparar lo que seria la rejilla o sea el desague que tengo en uso, como se ve en la fotografia el caño que tiene, entonces se prepara en este caso cortante uno de los laterales con un cortahierro, donde colocaria el caño nuevo.

image.png

Una ves que coloque el caño nuevo, el cual coincide en la otra punta, en donde colocaria el desague de la canaleta, bueno en un proximo post les estare mostrando como quedaria y en esta la cual quedaria amurada sobre la rejilla que ya la tenia por el desague de techo de la casa.

image.png

Bueno teniendo el caño con precion hacia abajo, procedo a terminar esta rejilla, la cual se le reboca muy bien por la parte de adentro, porque es donde se acumula el agua cuando se desplaza, luego de terminada dicha rejilla procedo a efectuar bien el corte del caño sobrante.

image.png

De esta manera amigos estoy efectuando las terminacion de lo que seria el desague flubial del techo del garage, de esa maanera queda todo mas estetico y presentable.

MUCHAS GRACIAS POR SEGUIRME Y LEERME, QUE TENGAN UN EXCELENTE DIA.

ENGLISH

Hello everyone, for the friends who follow me, to whom I dedicate my work, that can be very helpful for those who have to do this work and do not know how to start it, this time as you know I am building my garage, now I am preparing what would be the drainage, when I place the gutter, that way when it rains the water that falls from the roof, it will no longer damage a part of the garden and it will run through the pipes that I am building, starting by cutting the pipe of 100, to take into account well the measure that I will use for the drainage.

image.png

As I said friends, the drainage of the gutter, I make it coincide with the flubial drain that comes from the house, it is located on the side of the ground, then the drainage coincides just cona of the grids.

image.png

So to connect this pipe, the first thing is to prepare what would be the grid or the drain that I have in use, as seen in the picture the pipe that has, then it is prepared in this case cutting one of the sides with an iron cutter, where I would place the new pipe.

image.png

Once I placed the new pipe, which coincides at the other end, where I would place the drain of the gutter, well in a future post I will be showing you how it would be and in this one which would be mounted on the grid that already had it for the roof drain of the house.

image.png

Well having the pipe with pressure down, I proceed to finish this grid, which is very well overflowed inside, because it is where the water accumulates when it moves, after finishing the grid I proceed to make the cut of the excess pipe.

image.png

In this way friends I am making the completion of what would be the flubial drainage of the roof of the garage, that way everything is more aesthetic and presentable.

THANK YOU VERY MUCH FOR FOLLOWING AND READING ME, HAVE A GREAT DAY.



0
0
0.000
4 comments
avatar

Trabajar en la casa y reparar para poder obtener la mayor comodidad posible

0
0
0.000
avatar

Hola, la verdad es mi otro joi, me agrada hacerlo, gracias, saludos.

0
0
0.000