Sails and jeans cannot be inserted without opening the motorcycle engine

For many days my motorcycle was very tight and it was missing its engine had some problem so I had to go to the mechanic shop today when I got here I found out that all the genes of its engine and The seals are leaking and the mobile oil of the engine gets reduced due to leakage, so today the engine of the motorcycle is stopped and all the seals and seals are replaced.

All parts of the engine were disassembled and washed with petrol and thoroughly cleaned so that there is no problem when installing the seal because the seal is applied with magic or Samad bond and then the leakage is completely sealed. It goes and all the parts of the engine are also cleaned, the debris etc. are cleaned. This is the head part of the Versace which was cleaned and now it looks brand new.

All the parts of the bike are opened along with the engine, even if it is the magnet part with the chain cover, because the engine does not open without opening all these parts, so the magneto is opened and kept with the bike. All the parts near the engine are disassembled and kept separately so that there is no problem while fitting the motorcycle and all the parts can be cleaned and re-fitted.

The chain plays an important role in running the bike. If the chain is in good condition, the bike runs well and it should be checked after five days. If the chain is loose, it should be tightened so that while traveling Don't worry and China should take care of you

When the engine is opened, the timing chain and the timing chain gear should also be checked thoroughly so that no problem occurs later.

One thing to keep in mind is that it is important to sit by while the motorcycle engine is being worked on because you also know what new parts are being put into the motorcycle engine and what part of the engine is faulty. A must watch while working

If the setting of petrol is to be done, the car is done with a peter. The waste that is inside the car peter is taken out and there is a seam inside it, through which the fuel is more and less and the consumption of petrol is also less. It also has a spring that raises and lowers the rider and a choke is also attached, if the petrol runs out, it can be raised and the bike can be driven for a few kilometers.

The mechanic who works on motorcycles every day often has equipment at his shop that he does not have to go to the market to pick up from his shop and put it inside the motorcycle, thus saving time and also selling their spare parts. It happens

One of the strongest things is that it can be cycled by placing it in a netball when it's not opening.

One is Gutka Qawal which is small one is Qawal Gachha in which all the current of the motorcycle is generated and it goes forward through which the motorcycle starts it is also cleaned and fitted and the magnetic current Makes a bunch if broken, the bike won't run

After all the fittings of the motorcycle, it is started and kept started for some time so that the engine oil reaches all the parts.

After the bike was done well, when I started the bike, I was very happy because the sound of the bike had also changed and the engine oil coming out of the engine parts had also stopped. After a day all engine nut bolts should be checked and re-tightened for smooth ride and engine protection.
Thanks for reading and viewing my post carefully